Clearance Pumps

We offer many different brands of pumps at low, low prices! Check out our current clearance pump offers now!
 

Diaphragm Pumps

Air Driven Double Diaphragm pumps offer a reliable operation with the ability to pump a wide variety of products, operating on liquids with a viscosity similar to water up to a think viscose liquid of 30,000 Cps. They are extensively used within the Chemical, pharmaceutical, ink, paint, food & beverage industries, to name a few. Various body materials are available from cast iron, aluminium, stainless steel, Acetal, Polyethylene, polypropylene & solid PTFE.
 

Submersible Pumps

A submersible pump (or electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation. Submersible pumps are found in many applications. Single stage pumps are used for drainage, sewage pumping, general industrial pumping and slurry pumping. They are also popular with aquarium filters. Multiple stage submersible pumps are typically lowered down a borehole and used for water abstraction or in water wells.
 

Magnetic Drive Pumps

Magnetic Drive Centrifugal Pumps whose impeller is not connected directly to the motor. Instead the motor and impeller are each connected to magnets. As the motor spins its magnet, the other magnet spins which causes the impeller to turn. Small centrifugal pumps (e.g. for garden fountains) may be magnetically coupled to avoid leakage of water into the motor. The motor drives a rotor carrying a pair of permanent magnets and these drag round a second pair of permanent magnets attached to the pump impeller. There is no direct connection between the motor shaft and the impeller so no gland is needed and, unless the casing is broken, there is no risk of leakage. Magnetic drives can also be applied to gear pumps in the same way.
 

Centrifugal Pumps

A centrifugal pump is a rotodynamic pump that uses a rotating impeller to increase the pressure of a fluid. Centrifugal pumps are commonly used to move liquids through a piping system. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits into the downstream piping system. Centrifugal pumps are used for large discharge through smaller heads.
 

Spare Parts

Air Valve Repair Kits, Wet End Repair Kits, Mechanical Seals, O-Ring kits, Impellers... ect.
 

Diaphragms

Diaphragms are available in a variety of materials from Neoprene, Nitrile, EPDM, Santoprene, Hytrel & Viton Rubber. PTFE diaphragms are also available for highly corrosive/aggressive applications.
 

Barrel Pumps

A drum pump is used to remove liquid that is contained within a barrel or intermediate bulk container. This pump works on the principle of being a centrifugal pump, with the impeller/wet end submerged into the drum/IBC & the electric or air motor being located out side/above the drum/IBC. These pumps are also available with a progressive cavity/eccentric screw, which is ideal for transferring high viscosity products.
 

XYLEM Lowara Pumps

Lowara pumps are manufactured in AISI 304 and AISI 316 fabricated stainless steel, that covers many applications from water to some chemical compositions.
 

Jet Mufflers/Silencers

With six distinct series of air-silencing mufflers, we are confident that you will find the muffler that will best satisfy your quest for quiet air. Applications for JET pneumatic exhaust mufflers include, but are not limited to, Air Cylinders, Valves, AOD Pumps, Air Motors, Compressors, Piston and Turbine Vibrators and other Air-Driven Equipment.
 

Solid PTFE Balls

PTFE Balls are perfectly used, where metals or alloys cannot be used. PTFE Plastic Balls are highly functional in self-lubrication conditions such as ball bearings.
 

Borehole Pumps
 

Pulsation Damper
 

Petrol Driven Self Priming Pumps
 

Pump Hose & Extras
 

TEC Electric Motors

TEC Electric Motors were formed following a buy out of the former TURK Electric motor distribution company in the UK. The management team felt, with the right investment, direction and enthusiasm, a new dynamic electric motor distributor could be formed, offering a level of service currently lacking in the UK Power Transmission industry.
 

Peristaltic Pumps